Programmable FunctOn Keys - Icom IC-F110 Instruction Manual

1
PANEL DESCRIPTION
u 2/5TONE INDICATOR
Appears when the specfied 2/5-tone call s receved.
i ALPHANUMERIC DISPLAY
Dsplays the CH number, 5-tone ndcaton, DTMF num-
bers, Audble ndcaton, etc.
NOTE: When the alphanumerc dsplay blnks and trans-
mttng becomes mpossble, check that the DC battery
voltage has not dropped below 8 V or that the antenna s
not tuned properly or the antenna connecton s faulty.
3
■ Programmable function keys
The followng functons can be assgned to [P0], [P1], [P2],
[P3], [ ] and [

] programmable functon keys.

Consult your Icom dealer for detals concernng your trans-
cever's programmng.
In the followng explanatons, programmable functon names
are bracketed. The specfic swtch used to actvate the func-
ton depends on programmng.
• CH UP AND DOWN KEYS
➥ Select an operatng channel.
CH UP
➥ Select a transmt code channel after pushng
CH DN
the [TX CH] key.
➥ Select a DTMF channel after pushng the
[DTMF] key.
➥ Select a scan group after pushng and holdng
the [SCAN] key.
• BANK KEY
Select and determne a bank number.
BANK