Icom IC-F110 Instruction Manual page 8

1
PANEL DESCRIPTION
• OUTPUT POWER SELECTION KEYS
Select the transmt output power temporarly, or
permanently, dependng on the pre-settng.
• Contact your dealer for the output power level for each
selecton.
• TALK AROUND KEY
Turns the talk around functon ON and OFF.
TA
• The talk around functon equalzes the transmt fre-
quency to the receve frequency for moble-to-moble
communcaton.
• WIDE/NARROW KEY
Push ths key to toggle the bandwdth between
wde or narrow.
• DTMF AUTODIAL KEY
Push ths key to dsplay the text of the DTMF chan-
DTMF
nel number and set the desred channel number
va the [
transmt a specfied DTMF code.
5
]/[ ] key. Then, push ths key agan to
• CALL KEY
Transmt a 2-tone, 5-tone code.
• Call transmsson s necessary before you call another
staton dependng on your sgnalng system.
• The [CAL A] and/or [CAL B] keys may be avalable
when your system employs selectve 'Indvdual/Group'
calls. Contact your dealer about whch call s assgned
to each key.
• EMERGENCY KEY
Push and hold the key to transmt an emergency call.
EMER
• If you want to cancel the emergency call, push and hold
(or push) the key agan before transmttng the call.
• Dependng on the pre-settng, the emergency call s
transmtted one tme only, or repeatedly, untl recevng
a control code.
• HOOK SCAN
When the Hook Scan functon s turned ON, push
ths key to stop scannng temporarly. Push ths key
agan to re-start scannng.
• TX CODE KEY
Select a transmt 5-tone code (staton code) chan-
TX CH
nel.