Programmable FunctOn Keys - Icom IC-F5062 Instruction Manual

1
PANEL DESCRIPTION
■ Programmable function keys
The followng functons can be assgned to [UP], [DOWN],
[P0], [P1], [P2], [P3] and [P4] programmable functon keys.
Consult your Icom dealer or system operator for detals con-
cernng your transcevers programmng.
If the programmable functon names are bracketed n the fol-
lowng explanatons, the specfic key s used to actvate the
functon depends on the programmng.
CH UP AND DOWN KEYS
➥ Push to select an operatng channel.
➥ Push to select a transmt code channel after pushng [TX
Code CH Select].
➥ Push to select a DTMF channel after pushng [DTMF Au-
todal].
➥ Push to select a scan group after pushng and holdng
[Scan A Start/Stop]/[Scan B Start/Stop] for 1 sec.
ZONE KEY
Push ths key, then select the desred zone usng [CH Up]/
[CH Down].
What is "zone"?—The desred channels are assgned
nto a zone accordng to the ntended use for groupng.
For example, 'Staff A' and 'Staff B' are assgned nto a
"Busness" zone, and 'John' and 'Cndy' are assgned nto
a "Prvate" zone.
3
ZONE UP AND DOWN KEYS
Push to select an operatng zone.
SCAN A KEY
➥ Push to start and cancel scannng operaton.
• When Power ON Scan functon s actvated, push to pause the
scannng operaton. And the paused scan resumes after the
specfied tme perod has passed.
➥ Push and hold ths key for 1 sec. to ndcate the scan lst,
then push [CH Up] or [CH Down] to select the desred lst.
SCAN B KEY
➥ Push to start and cancel scannng operaton.
The scan restarts after the specfed tme perod has
passed when the scan (started wth ths key) s cancelled
by except for ths key operaton.
➥ Push and hold ths key for 1 sec. to ndcate the scan lst,
then push [CH Up] or [CH Down] to select the desred lst.