Table of Contents
Advertisement
I Subaudible tones
(Encoder function)
D Subaudible tones
q Select the frequency band, mode/channel you wish to set
the subaudible tones, such as VFO mode or memory/call
channel.
w Push [SET•LOCK] to enter set mode.
e Push [SET•LOCK] or [DUP•MONI] several times until "T"
and "rT" appear; or until "T SQL" and "CT" appear for tone
squelch or pocket beep use.
• When "d" is displayed in place of the 100 MHz digit, cancel the
DTMF memory encoder in advance. (p. 49)
[SET•LOCK]
r Rotate [DIAL] to select and set the desired subaudible fre-
quency.
t Push [V/MHz•SCAN] to exit set mode.
NOTE: The subaudible tone encoder frequency can be set
in a memory/call channel temporarily. However, the set fre-
quency is cleared once another memory channel or VFO
mode is selected. To store the tone frequency permanently,
overwrite the channel information.
[
"T" and "rT" appears
REPEATER OPERATION
z Set the frequency band, mode/channel you wish
SET
to set the subaudible tones, such as VFO mode
B
or memory/call channel.
• The subaudible tone frequency is independently pro-
grammed into each mode or channel.
x Push [
B(D-OFF)] to enter set mode.
SET
c Push [
B(D-OFF)] or [
SET
times until "T" and "rT" appears; or until "T SQL"
and "CT" appears for tone squelch or pocket
beep use.
• When "d" is displayed in place of the 100 MHz digit,
cancel the DTMF memory encoder in advance. (p. 49)
Push
v Push [Y] or [Z] to select and set the desired
subaudible tone frequency.
• Push and hold [Y]/[Z] to change the above tones
continuously.
b Push [
A(MW)] to exit set mode.
CLR
• Subaudible tone frequency list
67.0
79.7
94.8
110.9
131.8
69.3
82.5
97.4
114.8
136.5
71.9
85.4
100.0
118.8
141.3
74.4
88.5
103.5
123.0
146.2
77.0
91.5
107.2
127.3
151.4
4
C(T-OFF)] several
ENT
(unit: Hz)
156.7
171.3
186.2
203.5
229.1
159.8
173.8
189.9
206.5
233.6
162.2
177.3
192.8
210.7
241.8
165.5
179.9
196.6
218.1
250.3
167.9
183.5
199.5
225.7
254.1
4
22
Hide quick links:
Advertisement
Table of Contents
