I Copying Memory Contents - Icom IC-E208 Instruction Manual

I Copying memory contents

This function copies a memory channel's contents to VFO (or
another memory/call channel). This is useful when searching
for signals around a memory channel frequency and for re-
calling the offset frequency, subaudible tone frequency etc.
D Memory/call➪VFO
q Select the desired memory or call channel.
➥ Push [M/CALL•PRIO] several times to select memory
mode or call channel, then rotate [DIAL] or push [BAND]
to select the desired memory or call channel respec-
tively.
w Push [S.MW•MW] for 1 sec. to transfer the selected mem-
ory/call channel contents to the VFO.
• VFO mode is selected automatically.
[EXAMPLE]: Transferring memory channel 30 contents to VFO.
Front panel operation:
Push to select memory mode.
HM-133 operation:
Push to select memory mode.
MR/CALL
Rotate for selecting memory channel.
Push [Y]/[Z] to select memory channel.
MEMORY OPERATION
z Select the memory/call channel to be
transferred.
➥ Push [MR/CALL] to select memory mode,
then select the desired memory channel
MW
via [Y]/[Z] or keypad.
➥ Push [MR/CALL] for 1 sec. then push
[BAND] to select the call channel.
[Y]/[Z]
x Push [FUNC], then [
transfer the selected memory/call channel
contents to the VFO.
BAND
• VFO mode is selected automatically.
Push
Push then push
5
A(MW)] for 1 sec. to
CLR
for 1 sec.
for 1 sec.
5
28