Softkeys As An Empty Key - Aastra 57i IP Phone User Manual

Softkeys as an Empty Key

You can set a softkey to force a blank entry on the IP phone display for a
specific softkey. You do this by setting the softkey to "empty". The soft
keys are added in order (from softkey1 to softkey20) after any hard-coded
keys have been added. If a particular soft key is not defined, it is ignored.
Setting an EmptySoftkey
Aastra Web UI
Use the following procedure to configure an Empty softkey on the 57i
phone.
1. Click on Operation->Softkeys and XML.
2. Click on the Bottom tab or the Top tab.
3. Select from "Key 1" through "Key 20" on the bottom tab.
or
Select from "Key 1" through "Key 10" on the top tab.
4. In the "Type" field, select Empty.
5. If configuring a softkey on the Bottom Keys, in the state fields, check
(enable) or uncheck (disable) the states you want to apply to this softkey.
6. Click
7. Click on Operation->Reset.
8. In the "Restart Phone" field click
to save your changes.
to restart the IP phone.
Model 57i IP Phone User Guide 63