9. Pick another softkey (from top or bottom keys) to configure for Picking
up a call.
10.In the "Label" field, enter a label for the Pickup softkey.
11.In the "Value" field, enter the appropriate value based on the server in
your network.
Note: For values to enter in this field, see the table
uration Values"
12.In the "Line" field, select a line for which to apply the Pickup configura-
tion.
13.If configuring a softkey on the Bottom Keys, in the state fields, check
(enable) or uncheck (disable) the "Idle" and "Outgoing" states to apply
to this softkey.
14.Click
15.Click on Operation->Reset.
16.In the "Restart Phone" field click
on
page
47.
to save your changes.
"Park/Pickup Call Server Config-
to restart the IP phone.
Model 57i IP Phone User Guide
51