Handling Calls; Placing A Call On Hold - Aastra 57i IP Phone User Manual

Handling Calls

When you are connected to a call, you can use the softkeys or hard keys on
the phone to transfer, conference, or place a call on hold.

Placing a Call on Hold

When you place a call on hold, only your phone can retrieve the call.
IP Phone UI
To place a call on hold
1. Connect to the call (if not already connected).
2. Press the Hold
The line/call appearance light will begin to flash slowly and after a short
time the phone will beep softly to remind you that you still have a call on
hold. The screen displays "Call Held" with the line number the call is held
at the phone.
Note: The phone will not beep to remind you that you still have a call on hold if you
are connected to another call.
When on Hold
To let your caller know that they are still on hold, music plays softly (if this
has been set up for your system). The call/line appearance light for the line
you are on remains solid to indicate that you are still connected.
74 Model 57i IP Phone User Guide
key.
Tue May 17 10:19am 00:27
L1 Hold
>201
Keri March
Tue May 17 10:19am 00:27
L1 Connected
>201
Keri March