Softkeys As Flash Key - Aastra 57i IP Phone User Manual

Softkeys as Flash Key

You can set a softkey to generate a flash event when it is pressed on the 57i
or 57i handset. You do this by setting the softkey to "flash". The IP phone
generates flash events only when a call is connected and there is an active
RTP stream (for example, when the call is not on hold).
Setting a Flash Softkey
Aastra Web UI
1. Click on Operation->Softkeys and XML.
2. Click on the Bottom tab or the Top tab.
3. Select from "Key 1" through "Key 20" on the bottom tab.
or
Select from "Key 1" through "Key 10" on the top tab.
4. In the "Type" field, select "Flash".
5. In the "Label" field, enter a label to display on the phone for the softkey.
6. Click
7. Click on Operation->Reset.
8. In the "Restart Phone" field click
44 Model 57i IP Phone User Guide
to save your changes.
to restart the IP phone.