Note: You can use
available) of the parties in the conference call.
8.If you wish to exit the conference leaving the other two parties connected,
disconnect by placing the handset back on-hook or by pressing
To conference two calls you are already connected to
IP Phone UI
1. Begin with active calls on two different lines.
2. Press the Conference key. A new line will open.
3. Press the line key of the call you wish to conference with.
4. Press the Conference key again. The two lines link into a conference call.
NOTE: When a name is displayed, pressing
call.
Note: When a name is displayed, pressing
call.
to scroll through and see the numbers and names (if
drops the displayed party from the
Model 57i IP Phone User Guide
drops the displayed party from the
N
.
79