Softkeys as an Empty Key
You can set a softkey to force a blank entry on the IP phone display for a
specific softkey. You do this by setting the softkey to "empty". The soft
keys are added in order (from softkey1 to softkey20) after any hard-coded
keys have been added. If a particular soft key is not defined, it is ignored.
Setting an EmptySoftkey
Aastra Web UI
Use the following procedure to configure an Empty softkey on the 55i
phone.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
74
Model 55i IP Phone User Guide