Technical Specifications - RIDGID WTS2000L Operator's Manual

10 inch wet tile/stone saw with laser guide, led work light, and stand

Hide thumbs

Table Of Contents

Table of Contents

GETTING TO KNOW YOUR WET TILE/STONE SAW

22.5°/45° Bevel-Cut Indicator

Lights that indicate that the saw is positioned for a .5° or

45° bevel cut.

Anti-Splash Guard

Minimizes the over-spray and mist when cutting a work

piece.

Wrench Storage Clips

Conveniently holds the nut wrench and hex wrench when

they are not in use.

Extension Water Tray

Catches over-spray from large tile and redirects water into

the water tray.

Support Arm

Supports the motor unit on the frame.

Motor Unit

Powers the tile saw.

Bevel-Cut Adjustment Knob

To adjust the angle of the saw blade for a bevel cut, please

read "Bevel Cut Adjustment" on page 6.

Handle

For raising or lowering the saw unit.

Depth-Adjustment Knob

Please read "Depth Adjustment" on page 5.

Depth-Stop-Adjustment Knob

Please read "Depth Stop Adjustment" on page 5.

Work-Table Fence

Includes scale rules.

Wheel Locks

Used to stop the stand from rolling.

Stand Anchors

May be used to fix the stand to the floor.

Laser Adjustment Knob

Align the laser beam with the cutting line by adjusting one or

both adjustment knobs on the sides of the blade guide.

Please see Laser Beam Calibration on page 8.

Blade-Guard Release Knob

Please see Installing the Saw Blade on page 19.

WARNING!

The use of any accessory or attachment or the perfor-

mance of any operation with this tool other than those

recommend in this instruction manual may present a

risk of personal injury.