Universal Guide Adjustment - RIDGID WTS2000L Operator's Manual

ADJUSTMENTS

Universal Guide Adjustment

The universal guide can be used as a rip fence or an angle
guide. The universal guide has three positive stops: 0°, .5°
and 45°.
To adjust the universal guide:
1. Loosen the lever on the universal guide.
. Adjust the universal guide so that the desired angle
(0° - 45°) aligns with the indicator arrow (Fig. 34). Tight-
en the lever to lock the universal guide at the desired
angle.
For straight cutting, the universal guide is used as rip fence
(Fig. 35).
1. Set the angle to 45°.
. Loosen the universal-guide screw and position the guide
to the desired distance from the saw blade.
Groove Edge
7
Side Of
Universal
Guide
Zero Scale
Fig. 34
Fig. 35