ASSEMBLY
Mounting Your Saw
Before mounting the saw on the stand, make sure that both
wheels on the stand are locked (Fig. 16).
Place the saw on the stand. Make sure that the motor hous-
ing is positioned above the wheels and that the four mount-
ing holes of the saw-frame assembly are seated securely on
the four pins on the top of the stand (Fig. 17).
Locate the two fastening screws on the saw frame. Tighten
the two knobs attached to the stand on opposite corners
to securely fasten the saw to the stand (Fig. 18).
17
Locking Wheels
Fig. 16
Fig. 17
Fig. 18