Declaration Of Conformity - Rane SIXTY-ONE Operator's Manual

Application of
Council Directives:
2001/95/EC 2002/96/EC
2004/108/EC 2006/95/EC
2011/65/EU
Manufacturer:
Rane Corporation
10802 47th Avenue West
Mukilteo WA 98275-5000 USA
This equipment has been tested and found to be in compliance with all applicable standards and regulations applying to the EU's
Low Voltage (LV) directive 2006/95/EC and Electromagnetic Compatibility (EMC) directive, 2004/108/EC. In order for the customer
to maintain compliance with this regulation, high quality shielded cable must be used for interconnection to other equipment.
Modification of the equipment, other than that expressly outlined by the manufacturer, is not allowed under this directive. The
user of this equipment shall accept full responsibility for compliance with the LV directive and the EMC directive in the event that
the equipment is modified without written consent of the manufacturer. This declaration of conformity is issued under the sole
responsibility of Rane Corporation.
Type of Equipment:
Professional Audio Signal Processing
Brand: Rane
Model: Sixty-One
Immunity Results: THD+N: 4 dBu, 400 Hz, BW 20 Hz - 20 kHz
Test Description
RF Electromagnetic Fields Immunity
80 MHz -1000 MHz, 1 kHz AM, 80% depth, 3V/m
1400 MHz - 2700 MHz, 1 kHz AM, 80% depth, 3V/m
Conducted RF Disturbances Immunity
150 kHz - 80 MHz, 1 kHz AM, 80% depth, 3V rms
Magnetic Fields Immunity
50 Hz - 10 kHz, 3.0 - 0.3 A/m
Common Mode Immunity (Signal Ports)
50 Hz - 10 kHz, -20 dBu
I, the undersigned, hereby declare that the equipment specified above conforms
(Signature)
RANE SIXTY-ONE MIXER FOR SERATO SCRATCH LIVE • OPERATOR'S MANUAL 2.4.4

Declaration of Conformity

to the Directive(s) and Standard(s) shown above.
January 25, 2012
(Date)
Measurement Conditions
<-61 dB
<-61 dB
<-71 dB
<-67 dB
Bandpass re: 4 dBu, 1/3-octave
<-66 dB
Greg Frederick
(Full Name)
Mukilteo WA USA
Standard(s) to which
conformity is declared:
EN60065:2002/A1:2006/A11:2008
SERIAL NUMBERS 850000 - 950000
CE MARK FIRST AFFIXED IN: 2012
Compliance Engineer
(Position)
(Place)
EN55103-1:2009
EN55103-2:2009
EN50581:2012
ENVIRONMENT E2
49