Rane SIXTY-ONE Operator's Manual page 43

RECORD BURN - This section of the
control vinyl has been worn. Swap sides
or adjust the Vinyl Start Offset.
BAD RECORD BURN - Your record is
badly worn and Scratch Live is unable to
track. Swap sides or get new vinyl ASAP.
TONEARM IS SLIGHTLY TOO LIGHT -
Susceptible to dust and vibration. Adjust
the tonearm.
RANE SIXTY-ONE MIXER FOR SERATO SCRATCH LIVE • OPERATOR'S MANUAL 2.4.4
LEFT CHANNEL MISSING - The signal
from the needle is not reaching the Sixty-
One. Check the cable and cartridge wiring.
LEFT CHANNEL IS NOISE - Left
signal has been lost with a noisy loose
connection.
SIGNALS ARE SUMMING TO MONO
- The left and right signals have been
combined into one somewhere.
RIGHT CHANNEL MISSING - The signal
from the needle is not reaching the Sixty-
One. Check the cable and cartridge wiring.
RIGHT CHANNEL IS NOISE - Right
signal has been lost with a noisy loose
connection.
RIGHT CHANNEL IS INTERFERENCE
- Right signal has been lost with a noisy
connection and left channel crosstalk.
43