Important Safety Instructions; Warning; Fcc Statement - Rane SIXTY-ONE Operator's Manual

Hide thumbs Also See for SIXTY-ONE:
Table of Contents

Advertisement

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
Install in accordance with manufacturer's
instructions.
8. Do not install near any heat sources
such as radiators, registers, stoves, or
other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding type plug.
A polarized plug has two blades with
one wider than the other. A grounding-
type plug has two blades and a third
grounding prong. The wide blade or
third prong is provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord and plug from
being walked on or pinched particularly
at plugs, convenience receptacles,
and the point where it exits from the
apparatus.
11. Only use attachments & accessories
specified by Rane.
12. Use only with the cart, stand,
tripod, bracket, or table specified by
the manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-
over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
15. The plug on the power cord is the
AC mains disconnect device and must
remain readily operable. To completely
disconnect this apparatus from the AC
2
mains, disconnect the power supply
cord plug from the AC receptacle.
16. This apparatus shall be connected to
a mains socket outlet with a protective
earthing connection.
17. When permanently connected, an
all-pole mains switch with a contact
separation of at least 3 mm in each pole
shall be incorporated in the electrical
installation of the building.
18. If rack-mounting, provide adequate
ventilation. Equipment may be located
above or below this apparatus, but
some equipment (like large power
amplifiers) may cause an unacceptable
amount of hum or may generate
too much heat and degrade the
performance of this apparatus.
WARNING: To reduce the risk of fire
or electric shock, do not expose this
apparatus to rain or moisture. Apparatus
shall not be exposed to dripping or
splashing and no objects filled with
liquids, such as vases, shall be placed on
the apparatus.

Warning

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
To reduce the risk of electrical shock, do
not open the unit. No user serviceable
parts inside. Refer servicing to qualified
service personnel. The symbols shown
below are internationally accepted
symbols that warn of potential hazards
with electrical products.
This symbol indicates that
there are important operating
and maintenance instructions
in the literature accompanying
this unit.
This symbol indicates that a
dangerous voltage constituting
a risk of electric shock is
present within this unit.
These stickers are located on the bottom
of the mixer.
RANE SIXTY-ONE MIXER FOR SERATO SCRATCH LIVE • OPERATOR'S MANUAL 2.4.4

FCC Statement

This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used
in accordance with the instructions,
may cause harmful interference to
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
CAUTION: Changes or modifications not
expressly approved by Rane Corporation
could void the user's authority to operate
the equipment.
This Class B digital apparatus complies
with Canadian ICES-003.
Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du
Canada.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents