Midi Control Change Chart - Rane SIXTY-ONE Operator's Manual

MIDI Control Change Chart

MIDI control changes initiated by the mixer are dedicated to mixer functions and read only. MIDI out messages may be used to trigger
or control external software functions. The mixer can receive MIDI in control changes for USB record sources, phono sensitivity and
HP/LP filter resonance.
See the control panel graphics on the preceding page.
Functions highlighted in RED
Functions highlighted in GREEN
Control Hex # Function
#
0 0x00 Crossfader
2 0x02 PGM 1 Contour
3 0x03 PGM 2 Contour
4 0x04 PGM 1 Left-Right Pan
5 0x05 PGM 2 Left-Right Pan
7 0x07 USB Aux Level
21 0x15 Analog 1 Phono Sensitivity
22 0x16 PGM 1 Filter Resonance
23 0x17 PGM 1 Input Record Source (USB
5-6)
24 0x18 Analog 2 Phono Sensitivity
25 0x19 PGM 2 Filter Resonance
26 0x1A PGM 2 Input Record Source (USB
7-8)
27 0x1B Analog 3 Phono Sensitivity
30 0x1E Analog 4 Phono Sensitivity
33 0x21 Main Record Select, (USB 11-12)
63 0x3F FlexFX Wet/Dry
65 0x41 PGM 1 LP/HP Filter
66 0x42 PGM 2 LP/HP Filter
69 0x45 Session In Level
RANE SIXTY-ONE MIXER FOR SERATO SCRATCH LIVE • OPERATOR'S MANUAL 2.4.4
are MIDI-Out Mixer controls.
are MIDI-In Mixer controls from the software control panel.
Values
0-127, 0x00-0x7F
0-127, 0x00-0x7F
0-127, 0x00-0x7F
0-127, 0x00-0x7F
0-127, 0x00-0x7F
0-127, 0x00-0x7F
Value Hex Sensitivity
(mV)
0 0x00 2.5
1 0x01 3
2 0x02 3.5
3 0x03 4
4 0x04 4.5
5 0x05 5 (Default)
6 0x06 5.5
7 0x07 6
8 0x08 6.5
9 0x09 7
10 0x0A 7.5
11 0x0B 8
12 0x0C 8.5
13 0x0D 9
14 0x0E 9.5
15 0x0F 10
0-127, 0x00-0x7F Low to High Resonance
1 0x01 Record A1
2 0x02 Record A2
Same as Analog 1 Phono Sensitivity
0-127, 0x00-0x7F Low to High Resonance
1 0x01 Record A3
2 0x02 Record A4
Same as Analog 1 Phono Sensitivity
Same as Analog 1 Phono Sensitivity
1 0x01 Record Main Mix
2 0x02 Record Mic
0-127 0x00-0x7F
0-127 0x00-0x7F
0-127 0x00-0x7F
0-127 0x00-0x7F
dB
16.04
14.46
12.12
11.96
10.94
10.02
9.19
8.44
7.74
7.10
6.5
5.94
5.41
4.92
4.45
4.00
47