Deleting Crates And Tracks; Copy & Move Files & Folders; Copy & Move Crates; Scratch Live Backup - Rane SIXTY-ONE Operator's Manual

TIP: Drag and drop files, folders, or
drives onto the Relocate Lost Files
button from the Files pane. This is
useful if you know the location of your
files, as it only scans the drag and drop
location, with faster relocation.

Deleting Crates and Tracks

To delete tracks from your Scratch Live
library, select the track and use the
keyboard shortcut ctrl-delete. Make
sure you have the Protect library option
unchecked in the Library tab of the Setup
screen.
• Deleting a track when you are in the
" All..." playlist removes it from your
library and any crates that the track may
be in.
• Deleting a track inside a crate removes it
from that crate but the file will remain in
All..." playlist.
your "
• Deleting a track from a subcrate will
remove it from the subcrate and the
main crate but not the "
• Crates that are deleted are sent to the
recycle bin/trash.
NOTE: To delete any files from your
library and your hard drive (sending
them to the recycle bin) use the
shortcut ctrl-shift-delete.
If you are using iTunes playlists, your files
cannot be deleted this way. You will need
to delete them from within iTunes.
Copy & Move Files & Folders
Scratch Live gives you the ability to
copy and move files, folders and crates
between drives or to a new location on the
same drive.
To copy or move your files and/or
folders, open the Files panel and select,
drag and drop them in the desired new
location. Scratch Live will then prompt
you with the following options:
RANE SIXTY-ONE MIXER FOR SERATO SCRATCH LIVE • OPERATOR'S MANUAL 2.4.4
Copy: Select this to make a copy of
the selected files and folders in the new
location. Your Scratch Live library will now
contain entries for both the originals and
copies.
Move: Select this to move the selected
files and/or folders to the new location.
Your Scratch Live library and crates
will now reference the files in their new
location.
Cancel: Cancel any changes.
Remove original references from
library: Check this option when using
the copy feature to remove the original
references to these files in your Scratch
Live library and replace them with the
copies in the new location. The original
files will still be kept in their current
location, but will no be longer referenced
in your Scratch Live library.
Copy & Move Crates
You can also copy or move your Crates
All..." playlist. and Subcrates to another drive in the
same way. Open the Files panel and
select, drag and drop your Crates or
Subcrates to the new drive. You will be
presented with the same options as
mentioned above. More information is in
the Support Articles at serato.com.

Scratch Live Backup

Scratch Live stores your library database
and crates information in the Scratch Live
folder on your hard disk. This folder is
created on a drive when files are added
to Scratch Live. A copy of each Scratch
Live folder called ScratchLiveBackup is
created next to the folder it is backing up.
This folder is created when exiting Scratch
Live. You will be prompted to backup your
Scratch Live library on exit if there is no
backup for a drive or if the last backup is
more than one week old.
Backup will only keep ONE level backup
at a time; each time backup runs, it
overwrites the previous backup.
NOTE: Make sure you back up your
music separately. This only backs up
the Scratch Live folder, not your files.
Mixing
With One
Turntable Or
CD Player
This single turntable technique allows you
to mix as if you had two turntables, using
just one. If one of your turntables is not
performing properly, or if you only have
one available, you will be able to continue
to mix the way you are used to.
The following is a step-by-step
description of how to perform a mix using
only your right turntable or CDJ with the
instant doubles feature.
Menu Settings
Go to the Setup menu, click on the
Playback tab. Make sure Instant doubles
is checked, and Lock playing deck is
unchecked.
1. Load a track onto the Right Deck in
Scratch Live and play as usual.
2. Put the Left Deck into INT mode.
3. Load the same song you have playing
on the Right Deck onto the Left Deck.
The track on the Left Deck will start
playing from the same point and at the
same pitch as the Right Deck.
4. You can now quickly slide your mixer's
crossfader over to the Left Deck.
5. Your Right Deck is now free to load up
a new song ready to mix in.
6. Repeat!
TIP: Instant doubles works with either
Deck.
See "Lock Playing Deck" on page 37.
See "Instant Doubles" on page 37.
33