Environment Variables - Qlogic Fast Fabric User Manual

Q
HOSTS - a list of hosts, used if the -h option is not supplied
CHASSIS - a list of chassis, used if the -C is used and the -h option is not
supplied
HOSTS_FILE - a file containing the list of hosts, used in absence of -f and -h
CHASSIS_FILE - a file containing the list of chassis, used in absence of -F
and -H
Example:
showallports
showallports -h 'elrond arwen'
HOSTS-'elrond arwen' showallports
showallports -C
showallports -H 'chassis1 chassis2'
CHASSIS-'chassis1 chasssi2' showallports
IBNODES='0x00066a0005000105 0x00066a0005000110' showallports
-I

Environment Variables

The following environment variables are also used by this command:
HOSTS, HOSTS_FILE - see discussion on selection of hosts above
CHASSIS, CHASSIS_FILE - see discussion on selection of chassis above
IBNODES, IBNODES_FILE - see discussion on selection of switches above
MGMT_HOST - host to use to perform IB node queries, used in absence of -M
FF_MAX_PARALLEL - when -p option is used maximum number of parallel
operations to perform at once.
FF_CHASSIS_LOGIN_METHOD - how to login to chassis. Can be SSH or
Telnet
FF_CHASSIS_ADMIN_PASSWORD - password for the administrator on all
chassis. Used in absence of -S option.
When performing showallports against hosts, internally SSH is used.
showallports requires that password-less SSH be setup between the host
running Fast Fabric and the hosts showallports is operating against. The
setup_ssh Fast Fabric tool can aid in setting up password-less SSH.
When performing showallports against a set of chassis, all chassis must be
configured with the same administrator password.
D000006-000 Rev A
showallports -I
showallports -I -N '0x00066a0005000105 0x00066a0005000110'
5 – Detailed Descriptions of Command LineTools
5-27