Qlogic Fast Fabric User Manual page 40

4 – Fast Fabric TUI Menu
QuickSilver Fabric Access Software Users Guide. Selecting items 1-9 will display
the given submenu. Pressing X will exit the menu system.
Selection of a Fast Fabric menu (6-9) will present a submenu such as below:
SilverStorm Technologies Inc. IB Host Setup Menu (4.1.1.0.15)
Fast Fabric Host List: /etc/sysconfig/iba/hosts
0) Edit Config and Select/Edit Hosts Files
1) Verify Hosts via Ethernet ping
2) Verify rsh/rcp Configured
3) Setup Password-less ssh/scp
4) Copy /etc/hosts to all hosts
5) Show uname -a for all hosts
6) Install/Upgrade InfiniServ Software
7) Configure IPoIB IP Address
8) Build MPI Test Apps and Copy to Hosts
9) Reboot Hosts
a) Refresh ssh Known Hosts
b) Rebuild MPI Library and Tools
c) Run a command on all hosts
d) Copy a file to all hosts
e) View ibtest result files
P) Perform the selected actions
N) Select None
X) Return to Previous Menu (or ESC)
The submenus typically present operations in the typical order they would be used
during an installation. Pressing the keys corresponding to menu items (0-9, a-e in
the example above) will toggle the Skip/Perform selection for the given item. As
shown in the example above, more than 1 item may be selected. Once the desired
set of items have been selected, press P. To unselect all items, press N. Pressing
X or ESC will exit this menu and return to the Main Menu.
If more than 1 item is selected, the items will be performed in the order shown in
the menu. This is the typical order desired during fabric setup. If it's desired to
perform items in a different order, select a single item and press P to perform it by
itself. Then repeat. An opportunity will be presented after each item to abort:
Hit any key to continue (or ESC to abort)...
If ESC is pressed, the sequence of operations will be aborted and return to the
previous menu. Any other key will result in the next selected menu item being
performed. This prompt is also shown after the last selected item completes, hence
permitting an opportunity to review the results before the screen is cleared to display
the menu.
4-2
Q
[Perform]
[Perform]
[ Skip ]
[Perform]
[ Skip ]
[Perform]
[Perform]
[Perform]
[Perform]
[Perform]
[Perform]
[ Skip ]
[ Skip ]
[ Skip ]
[ Skip ]
D000006-000 Rev A