A.8 Configure And Initialize Health Check Tools - Qlogic Fast Fabric User Manual

A – Fast Fabric Quick Install Checklist
Configure and initialize health check tools
A.8
Configure and initialize health check tools
This procedure should be followed on each IB management node from which the
health check tools will be used.
1. Edit fastfabric.conf and review the health check tools parameters.
2. If using embedded SM(s), create /etc/sysconfig/iba/esm_chassis.
3. Perform a health check using all_analysis -e.
4. Create a cluster configuration baseline using all_analysis -b.
5. If desired, schedule regular runs of all_analysis via cron or other
mechanisms.
A-4
Q
D000006-000 Rev A