Reboot Chassis; Generate All Chassis Problem Report Information; Run A Command On All Chassis; View Ibtest Results Files - Qlogic Fast Fabric User Manual

Q
4.3.5

Reboot Chassis

(Switch) This will run the ibtest -C reboot command to reboot all the selected
chassis and ensure they go down and come back up (as verified via ping over the
management network).
4.3.6

Generate all Chassis Problem Report Information

(Switch) This will run the captureall -C command to collect configuration and
status information from all chassis and generate a single *.tgz file that can be
sent to the Support Representative.
4.3.7

Run a command on all chassis

(Switch) This will run the cmdall -C command. A Chassis CLI command may
be specified to be executed against all selected chassis.
4.3.8

View ibtest results files

(All) This permits viewing of the test.log and test.res files which reflect the
results from ibtest runs (such as for updating Chassis Firmware or rebooting all
chassis per menu items above). The user is also given the option to remove these
files after viewing them.
If not removed, subsequent runs of ibtest from within the current directory will
continue to append to these files.
D000006-000 Rev A
4 – Fast Fabric TUI Menu
4-13