Qlogic Fast Fabric User Manual page 132

5 – Detailed Descriptions of Command LineTools
Health Check and Baselining Tools
All files generated by fabric_analysis start with chassis. in the file name.
The chassis_analysis tool generates files such as the following within
FF_ANALYSIS_DIR. The actual file names reflect the individual chassis
commands that have been configured via the FF_CHASSIS_HEALTH and
FF_CHASSIS_CMDS parameters:
Health Check:
latest/chassis.hwCheck - output of hwCheck command for all selected
chassis
Baseline:
baseline/chassis.fwVersion - the output of fwVersion command for
all selected chassis.
baseline/chassis.ismChassisSet12x - the output of the
ismChassisSet12x command for all selected chassis.
baseline/chassis.ismShowPStatThresh - the output of the
ismShowPStatThresh command for all selected chassis.
baseline/chassis.showChassisIpAddr -the output of the
showChassisIpAddr. command for all selected chassis.
baseline/chassis.showDefaultRoute - the output of the
showDefaultRoute command for all selected chassis.
baseline/chassis.showIBNodeDesc - the output of the
showIBNodeDesc command for all selected chassis.
baseline/chassis.showInventory - the output of the
showInventory command for all selected chassis.
baseline/chassis.snmpCommunityConf - the output of the
snmpCommunityConf command for all selected chassis.
baseline/chassis.snmpTargetAddr - the output of the
snmpTargetAddr command for all selected chassis.
baseline/chassis.timeDSTConf - the output of the timeDSTConf
command for all selected chassis.
baseline/chassis.timeZoneConf - the output of the timeZoneConf
command for all selected chassis.
During a baseline run, the above files are also created in
FF_ANALYSIS_DIR/latest.
Full analysis:
latest/chassis.hwCheck - the output of the hwCheck command for all
selected chassis.
5-78
Q
D000006-000 Rev A