Qlogic Fast Fabric User Manual page 160

B – Fast Fabric Configuration Files
iba_mon.conf
# This file controls the iba_mon Port Counter monitoring
Thresholds.
# [ICS VERSION STRING: unknown]
#
# Error Counters are specified in absolute number of errors over
Interval.
# All Data Movement thresholds are specified in terms of average
data/second
# over the monitoring interval.
#
# Setting a threshold to 0 disables monitoring of the given
counter
#
# Output is generated when a threshold is exceeded.
#
# Counters for which a non-zero threshold is specified will be
cleared by
# iba_mon and may impact any remote Performance Managers which are
monitoring
# the given Counter
Interval
seconds
SyslogFacility
disable
# Normal Data Movement
PortXmitData
PortRcvData
PortXmitPkts
PortRcvPkts
# Error Counters
SymbolErrorCounter
LinkErrorRecoveryCounter
LinkDownedCounter
PortRcvErrors
PortRcvRemotePhysicalErrors
#PortRcvSwitchRelayErrors
increments
PortXmitDiscards
PortXmitConstraintErrors
PortRcvConstraintErrors
LocalLinkIntegrityErrors
ExcessiveBufferOverrunErrors
VL15Dropped
B-8
10 # monitoring interval in
local6 # syslog facility code, or
0 # as MB/second
0 # as MB/second
0 # as packets/second
0 # as packets/second
100
3
3
100
100
100 # Anafa2 issue, incorrectly
100
10
10
3
3
100
Q
D000006-000 Rev A