Qlogic Fast Fabric User Manual page 134

5 – Detailed Descriptions of Command LineTools
Health Check and Baselining Tools
latest/chassis.timeDSTConf - the output of the timeDSTConf
command for all selected chassis.
latest/chassis.timeDSTConf.diff - diff of the baseline and latest
timeDSTConf.
latest/chassis.timeZoneConf - the output of the timeZoneConf
command for all selected chassis.
latest/chassis.timeZoneConf.diff - diff of the baseline and latest
timeZonfConf.
The .diff files are only created if differences are detected.
If the -s option is used and failures are detected, files related to the checks that
failed are also copied to a time stamped directory name under
FF_ANALYSIS_DIR, such as:
FF_ANALYSIS_DIR/2007-11-22-09:53:04
5.6.4.1
Chassis items checked against the baseline
Based upon showInventory:
addition/removal of Chassis FRUs
❥
❑
removal of redundant FRUs (spines, power supply, fan)
❥
Based upon fwVersion:
changes to primary or alternate FW versions installed in cards in chassis
❥
Based upon showIBNodeDesc:
changes to configured IB node description for chassis. Note changes
❥
detected here would also be detected in fabric level analysis
Based upon ismShowPStatThresh:
changes to configured port thresholds for chassis port error thresholding
❥
Based upon ismChassisSet12x:
changes to chassis link width controls. Note that changes detected here
❥
would also be detected in fabric level analysis.
Based upon timeZoneConf and timeDSTConf:
changes to the chassis time zone and daylight savings time configuration
❥
Based upon snmpCommunityConf and snmpTargetAddr:
5-80
Replacement is only checked for FRUs that showInventory displays the
serial number. For the 9000 series, the fan and power supply replacement
is not checked, just present.
Q
D000006-000 Rev A