Qlogic Fast Fabric User Manual page 77

Q
-f hostfile - file with hosts in cluster. The default is
/etc/sysconfig/iba/hosts.
-h hosts - the list of hosts to download files to
-u user - the user to perform the copy. The default is current user code
-d download_dir - the directory to download files to. The default is
./downloads. If not specified, the environment variable DOWNLOADS_DIR
will be used. If that is not exported the default (./downloads) will be used.
source_file - the name of files to copy from the system. Multiple files may
be listed. The option source_file is relative to
download_dir/<HOSTNAME>.
A local directory within download_dir/ must exist for each host being
downloaded to Each downloaded file will be copied from
download_dir/<HOSTNAME>/source_file.
dest_file - is the name of the file or directory on the destination hosts to
copy to.
If more than one source file is specified, dest_file will be treated as a directory
name. The given directory must already exist on the destination hosts (the copy
will fail for hosts where the directory does not exist).
Example:
downloadall -h 'arwen elrond' ics_srp.cfg ics_inic.cfg
/etc/sysconfig
# copy two files to all hosts
NOTE:
To copy files from hosts in the cluster to this host use uploadall.
Environment Variables
The following environment variables are also used by this command:
HOSTS, HOSTS_FILE - see discussion on selection of hosts above.
FF_MAX_PARALLEL - when -p option is used maximum number of parallel
operations to perform at once.
DOWNLOADS_DIR - directory to download from, used in absence of -d.
D000006-000 Rev A
# copy two files to 2 hosts
downloadall ics_srp.cfg ics_inic.cfg /etc/sysconfig
The tool downloadall can only copy from this system to a group of
hosts in the cluster. The user@ style syntax cannot be used in the
arguments to downloadall.
5 – Detailed Descriptions of Command LineTools
5-23