Basic Setup And Administration Tools; Pingall - Qlogic Fast Fabric User Manual

Q
Ports are specified as hca:port. No spaces are permitted. The first HCA is 1
and the first Port is 1. The value 0 for HCA or Port has special meaning. The
allowed formats are:
0:0 = 1st active port in system
0:y = port y within system
x:0 = 1st active port on HCA x
x:y = HCA x, port y
Files to be included may be specified via an include directive followed by a file
name. File names specified should generally be absolute pathnames. If relative
pathnames are used, they will be searched for within the current directory then
/etc/sysconfig/iba.
Comments may be placed on any line. By using a # to precede the comment.
On lines with a port or include directive, the # must be white space separated
from any preceding port or included filename.
5.1.9.2
Explicit ports
When ports are explicitly specified via the -p option or the PORTS environment
variable, a space separated list of ports may be supplied.. For example: -p
'1:1 1:2 2:1'.
5.2

Basic Setup and Administration Tools

5.2.1

pingall

(All): Pings a group of hosts or chassis to verify that they are powered on and
accessible via TCP/IP ping
Usage:
pingall [-Cp] [-f hostfile] [-F chassisfile] [-h 'hosts'] [-H
'chassis']
D000006-000 Rev A
-C - performs a ping against a chassis. The default is hosts
-p - ping all hosts/chassis in parallel
-f hostfile - file with hosts in cluster, default is
/etc/sysconfig/iba/hosts
-F chassisfile - file with chassis in cluster default is
/etc/sysconfig/iba/chassis
-h hosts - list of hosts to ping
-H chassis - list of chassis to ping
5 – Detailed Descriptions of Command LineTools
5-11