B-6 Port Group Member Attributes - Qlogic SANbox 5600 Series Installation Manual

B – Command Line Interface
Group Command
Attribute
Member
Authentication
Primary Hash
Primary Secret
Secondary Hash
Secondary
Secret
B-28
Table B-6. Port Group Member Attributes
Port worldwide name for the N_Port device that would attach to the
switch. A member cannot belong to more than one group.
Enables (CHAP) or disables (None) authentication using the Chal-
lenge Handshake Authentication Protocol (CHAP). The default is
None.
The preferred hash function to use to decipher the encrypted Pri-
mary Secret sent by the Port group member. The hash functions are
MD5 or SHA-1. If the Port group member does not support the Pri-
mary Hash, the switch will use the Secondary Hash.
Hexadecimal string that is encrypted by the Primary Hash for
authentication with the Port group member. The string has the fol-
lowing lengths depending on the Primary Hash function:
MD5 hash: 16-byte
SHA-1 hash: 20-byte
Hash function to use to decipher the encrypted Secondary Secret
sent by the Port group member. Hash values are MD5 or SHA-1.
The Secondary Hash is used when the Primary Hash is not avail-
able on the Port group member. The Primary Hash and the Second-
ary Hash cannot be the same.
Hex string that is encrypted by the Secondary Hash and sent for
authentication. The string has the following lengths depending on
the Secondary Hash function:
MD5 hash: 16-byte
SHA-1 hash: 20-byte
Description
S
59096-02 C