Qlogic SANbox 5600 Series Installation Manual page 132

B – Command Line Interface
Alias Command
delete [alias]
Deletes the specified alias given by [alias] from the zoning database. If the alias is
a member of the active zone set, the alias will not be removed from the active
zone set until the active zone set is deactivated.
list
Displays a list of all aliases. This keyword does not require an admin session.
members [alias]
Displays all members of the alias given by [alias]. This keyword does not require
an admin session.
remove [alias] [member_list]
Removes the ports/devices given by [member_list] from the alias given by [alias].
Use a <space> to delimit ports/devices in [member_list]. A port/device in
[member_list] can have any of the following formats:
Domain ID and port number pair (Domain ID, Port Number). Domain IDs can
be 1–-239; port numbers can be 0–-255.
6-character hexadecimal device Fibre Channel address (hex)
16-character hexadecimal worldwide port name (WWPN) for the device with
the format xx:xx:xx:xx:xx:xx:xx:xx.
rename [alias_old] [alias_new]
Renames the alias given by [alias_old] to the alias given by [alias_new].
B-10
S
59096-02 C