Qlogic SANbox 5600 Series Installation Manual page 203

A
Auto
The port speed is automatically detected. This applies only to ports 0–15.
state [state]
Specifies one of the following administrative states for the specified port:
Online
Places the port online. This activates and prepares the port to send data.
Offline
Places the port offline. This prevents the port from receiving signal and
accepting a device login.
Diagnostics
Prepares the port for testing. This prepares the port for testing and prevents
the port from accepting a device login.
Down
Disables the port by removing power from the port lasers.
59096-02 C
B – Command Line Interface
Set Port Command
B-81