Flow Test Screen (End Of Test Mode) - Fluke Biomedical IDA-4 Plus Operator's Manual

CHANNEL 1
FLOW 0.00
VOLUME 0.00
ELAPSED TIME 00: 00: 00
SAVE SAVE & PRINT
GRAPH STATUS

Flow Test Screen (End of Test Mode)

This view of the FLOW TEST screen allows the
operator to save, print or delete the results of the test.
Save
Avg
ml /h
This saves the results of the flow test, or series of tests,
to non-volatile memory for later printing or transfer to a
ml computer via the RS232 port.
Save & Print
This saves the results as described above, then sends a
PRINT
report to a printer connected to the printer port on the
DELETE
instrument. The report will be in either full or summary
format, as previously selected by the operator from the
UTILITIES / PRINTER menu.
Print
This sends a report to a printer connected to the printer
port on the instrument. The report will be in either full
or summary format, as previously selected by the
operator from the UTILITIES / PRINTER menu.
Graph
This switches to the FLOW GRAPH screen for the
current channel to allow a graph of the results to be
viewed before they are saved or printed.
Status
This switches to the STATUS ALL CHANNELS
screen to allow the operator to use another channel or
change settings via the UTILITIES menu.
Delete
This deletes the current set of results from the
operational memory of the instrument, without saving
to the non-volatile memory. CAUTION: Once this
option has been invoked there will not be any way to
recover, view or print the results of this test.
Infusion Pump Analyzer
Operating Instructions
3
3-17