Smtp Server Setup - EverFocus NVR User Manual

2.2.6 SMTP Server Setup

1. Open Internet Explorer and log in to the unit.
2. Click Settings / Recording & Event / E-Mail.
3. Click the SMTP Server tab.
Server Address: SMTP (Simple Mail Transport Protocol) server IP

address.
Port: SMTP port.

Sender: Sender information.

Subject: The subject of the mail.

Body: E-Mail content.

SMTP Authentication: Before sending out an E-Mail, enter the user

name and password for SMTP authentication.
Username

Password

4. Click the Send Test Mail button and the system will send a test mail to the
sender. Check it after testing.
5. Click the Save button.
32