Recording Schedule / Event Setup - EverFocus NVR User Manual

Automatic

automatically when the disk space is full.
Keep Video: Set a period during which the recorded video clips will be

kept intact.
If you select both Automatic Recycle and Keep Video, Automatic Recycle will take
priority. In other words, the data will only be kept until the disk space is full.

2.2.2 Recording Schedule / Event Setup

Instead of Always Recording, you can begin the recording by setting the
Recording Schedule.
1. Open Internet Explorer and log in to the unit.
2. Click Settings / Recording & Event / Recording Settings.
3. Click the Recording Schedule tab.
4. Check the Day or Week mode.
Day: Schedule the recording to turn the recorder on and off at the same

time every day according to your setting.
Week: Schedule the recording for each day of the week differently.

5. Click the schedule of the camera which needs to be modified.
6. Click the column at the bottom of the page.
Insert: Insert new schedules.

Delete: Delete the selected schedule.

Configure: Modify the schedule and recording mode settings.

Copy: Copy current Day Schedule to other channel(s); copy current

Week Schedule to other day(s) of a week or other channel(s).
Recycle: Check the Enable option to recycle disk space
24