System Events And Responding Actions Setup - EverFocus NVR User Manual

Output: When an input is triggered, the system will send an output

signal to other connected devices.
E-Mail: When an input is triggered, the system will send e-mail

notifications. Make sure to add an e-mail address first.
CMS: When an input is triggered, the system will send out a signal to

CMS. CMS will highlight this event.
Show on Camera: When an input is triggered, the system will show an

alert message on selected camera(s) of screen.
7. Click the Save button.

2.2.5 System Events and Responding Actions Setup

1. Open Internet Explorer and log in to the unit.
2. Click Settings / Recording & Event / Event & Action Management.
3. Click the Event & Action tab.
4. Click System to unfold the list of system events, and then select one of the
five events.
30