I/O Box Input And Responding Action Setup - EverFocus NVR User Manual

Output: When an event occurs, the system will send an output signal to

other connected devices.
E-Mail: When an event occurs, the system will send e-mail notifications.

Make sure to add an e-mail address first.
CMS: When an event occurs, the system will send out a signal to CMS.

CMS will highlight this event.
6. Click the action, and then click the Configure button to modify the details
of that action if necessary.
7. Click the Save button.
After selecting camera events, the event information will display on the screen when
it's triggered.

2.2.4 I/O Box Input and Responding Action Setup

1. Open Internet Explorer and log in to the unit.
2. Click Settings / Recording & Event / Event & Action Management.
3. Click the Event & Action tab.
4. Select an input of I/O Box from list.
5. Click the Add button to set up the responding actions of this event.
6. Click the action, and then click the Configure button to modify the details
of that action if necessary.
29