EverFocus NVR User Manual page 103

Enable Move: Adjust the current view of camera which supports PT

function by dragging the
Enable Digital

view. The lower right square flashing on the video grid indicates the
correspondent view of the camera.
ImmerVision Lens

mode, Quad mode and Perimeter mode.
Stream Profile: Select the stream profiles, original, low, minimum.

Enable Audio: Enable audio on active channel(s).

Snapshot: Select the snapshot function to capture a specific video

image immediately.
Toggle Fullscreen: Select it to view cameras with full screen. Press "Esc"

or right click un-select full screen to go back to the original view.
Also, right click on camera list to duplicate and connect/disconnect designate
cameras, and do other functions.
Duplicate Camera: Select the duplicate camera function to create

multiple views. The duplicated camera will be shown with green indicator
as the right picture. Combine this function with digital PTZ, users are
allowed to enlarge different spots and view them in different channels
without failing to record the whole view.
button on the display screen.
PTZ: Click the + or – button to zoom in or zoom out the
Setting: Select the mode of lens, original, PTZ
102