EverFocus NVR User Manual page 29

Connect lost: When a connection between the camera and this unit is

lost, the system will trigger an action.
Motion from

triggers an action.
Input: Any external input can trigger an action.

When setting the event Motion from Camera, make sure to set up the camera's
motion detection function first. Besides, event log will be recorded only if event is
selected on this page.
4. Click the Configure button to enable the event and select the active
period.
Always Actived: The selected event is always active.

Actived only in the following

in the designated time, which able to cover two days e.g. from 18:00 to
09:00.
I/O Type: Check one of the options of I/O type. N/O means normal open,

while N/C means normal close.
5. Click the Add button to set up the responding actions of this event.
Camera: When video motion is detected, the camera
period: The selected event is only active
28