Modify Camera Information; Modify Camera Parameters - EverFocus NVR User Manual

Note that the "username" field is called "Administrator Name" in this instance. This is
because admin-level control is required in this setup procedure to ensure smooth
interaction between the camera and the NVR.
6. Click the Save button.
Save: Save the configuration of this camera.

Reset: Return to the previous saved settings of the selected camera.

Clear: Set all the settings to their default values.

Auto Detection: After inserting the IP address, port, username, and

password, click this button to automatically detect other camera
information, including the Video Channel (feeds per channel), Protocol,
Vendor, and Model.

2.1.3 Modify Camera Information

1. Open Internet Explorer and log in to the unit.
2. Click Settings / IP Camera / Camera Settings.
3. Click the Camera Settings tab.
4. Click the camera which you want to modify.
5. Modify the information of this camera.
6. Click the Save button.
7. Use the same method to replace a camera if needed.

2.1.4 Modify Camera Parameters

1. Open Internet Explorer and log in to the unit.
2. Click Settings /IP Camera / Camera Parameters.
3. Click the Camera Parameter tab.
4. Click the camera which you want to modify on the camera list.
5. Modify the information of this camera.
6. Click the Save button.
20