Alarm Server - EverFocus PARAGON 264x4-16 Instruction Manual

5.7.4 Alarm Server

Server IP1~3: IP address of client PC with installed PowerCon Software. The network alarm can be
transmitted to up to 3 addresses.
Protocol: Select the protocol type for alarm transmission:
UDP: User Datagram Protocol
TCP: Transmission Control Protocol
Note: Please use UDP for LAN applications only, as this mode is not secure for internet
connections.
Port: Select the transmission port for network alarm messages
Network ID: The network ID is an identifier for the alarm transmitter.
Notes:
1. The network ID must consist of 10 numbers
2. The field is a numeric one; characters are not permissible.
3. Please do not use left-hand zeros.
Figure 5-29 Network Menu – Alarm Server
78