Notification - EverFocus NVR User Manual

4. Select appointed server group to activate auto scan.
5. Select Primary channel which will always be on the screen when
activating auto scan; while select Secondary channel which has second
priority when activating auto scan. Enter the time interval for auto scan.
6. Select the screen division of NxN type.
7. Click the OK button.

5.2.9 Notification

1. Startup > NVR > Remote Live Viewer.
2. Click the General Setting button.
3. Click the Notification tab.
4. Check Show recording status to show the crystal ball with recording
status on monitor display.
5. Check Show camera event to display the words of detected camera event
on the correspondent screen.
6. Check Popup system event to pop up system event message dialog as a
warning when a system event occurred.
7. Check Popup E-map on event to pop up E-map with event indicator when
camera or I/O Box event occurred
8. Click the OK button.
"Popup E-map on event" only activates on event, which means that you should not
only edit camera and I/O on E-map but setup camera motion, camera input and I/O
Box input as an event. Refer to Event & Action Management
109
to do the settings.