Wireless Manager Application - EUROCOM Notebook User Manual

Wireless Manager Application

The connection information is stored on the USIM card supplied by the service pro-
vider (where this is not the case you may need to create a profile - see
Profile" on page 7 - 73).
1. Power on the 3.75G/HSPA module using the Fn +
2. Access the Wireless Manager application from the Start menu (Start > All
Programs > Wireless Manager > Wireless Manager) or the desktop shortcut
3. You may be required to enter you PIN number and click OK.
4. Click the Connect
most cases this will be pre-configured).
key combination.
button (a Profile needs to be selected, and in
"Creating a
PIN Number
The PIN number for
your USIM card will be
supplied by your service
. provider. You usually
have a limited number of
attempts to enter the
correct PIN number.
If you fail to enter the
PIN number correctly
you will be blocked from
accessing
card and you will need a
PUK (Personal
blocking Key), supplied
by your service provider,
to unlock it.
Figure 7 - 47
Wireless Manager
(Not connected)
3.75G/HSPA Module 7 - 67
Modules

7
the USIM
Un-