EUROCOM Notebook User Manual page 203

Before installing the application, make sure that the 3.75G/HSPA module is ON
(installing the driver with the module off will not allow the software to detect the
module hardware correctly). Use the Fn +
page 1 - 12) or Control Center button to toggle power to the 3.75G/HSPA mod-
ule. Make sure you install the drivers in the order indicated in
- 3. Note that exiting the application does NOT turn off the 3.75G/HSPA mod-
ule.
• Wireless Manager - See
driver installation information and
- 67 for instructions on using Wireless Manager.
key combination (see
"Wireless Manager Installation" on page 7 - 66
"Wireless Manager Application" on page 7
Table 1 - 4, on
Table 4 - 1, on page 4
for
3.75G/HSPA Module 7 - 65
Modules

3.75G/HSPA
Modules & System
Wake Up
Note that the 3.75G mod-
ules DO NOT support
system wake up on
3.75G/HSPA modem ac-
tivity.
7