Fc631 Frame Controller; Mm641 Madi Interface Card; Sp661 Signal Processor - Euphonix Max Air Installation Manual

Hide thumbs Also See for Max Air:

Table of Contents

Euphonix Max Air Installation Guide

FC631 Frame Controller

AES Sync In (3-pin Lemo Female): The DF64 Digital Frame clocks to the signal at this

port when the sync source is set to AES Sync. Connect this port to a digital sync reference.

AES Sync Out (3-pin Lemo Male): This signal is active regardless of the selected sync

source.

Word In (BNC): The DF64 clocks to the signal at this port when the sync source is set to

Word Clock. Connect this port to a digital sync reference.

Word Out (BNC): This signal is active regardless of selected sync source.

IEEE 1394 ports (2): High speed communication interface to the PC253d Digital Pilot

Computer. This interface carries real-time control and metering data between the PC253d

and the DF64. Connect either port to any of the IEEE 1394 ports on the dedicated PC253d

for this frame via firewire (provided).

MADI In (4) and MADI Out (4) (8 BNC): Digital audio in and outs. See the MADI Hookup

diagrams (Figure 2-9 and Figure 2-8) for details on these connections.

This card has no connections.

Max Air Components

Table of Contents