Resolving A Ribbon Sensor Error (Ribbon Miscue) - FARGO electronics DTC400 User Manual

RESTRICTED USE ONLY

Resolving a Ribbon Sensor Error (Ribbon Miscue)

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
•
Symptom: The Printer rolls through Ribbon and errors out
•
Printer Error State: The Printer cannot find the next panel on the Ribbon.
•
LCD Error Display: Ribbon Miscue
•
Driver Monitor Error Display: Ribbon Sensor
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)
Fargo Electronics, Inc.
Continued on the next page
4-19