Selecting The Auto Ribbon Select Option - FARGO electronics DTC400 User Manual

RESTRICTED USE ONLY

Selecting the Auto Ribbon Select option

Step Description
1 Click on the Auto Ribbon Select button to verify that the Ribbon type selected
matches the Ribbon installed in the Printer. (Note: The Printer Driver will
change the Ribbon type to the correct setting or validate. It will also display a
dialog that it has changed the current setting or that the current Ribbon type is
correct.)
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)
Fargo Electronics, Inc.
5-17