Network Control Window Introduction - Eiki LC-WIP3000 Owner's Manual

Network Control Software Application-Software Control

Network Control Window introduction

Icon
Scan all
Start Auto Scan
Stop Auto Capture
Auto Search
Open Project File
Save Project File
System Setting
About
Exit
Register projector
Exit
Name
Capture the all registered projectors' information one
time only.
According to the system setting, get the projector
information automatically.
Stop scanning the projector information.
Search the projector in the same network to register
and modify the setting.
Open project file which was saved.
Save the registered projector in this project.
Setting the projector system reminder message.
Icon content description.
Exit the Network software.
Register projector's information.
Cancel registered information.
59
Description