Network Control Software Application
Before Using Network Control Software
1. If the system is Windows 2000, XP or Vista, the PC should be started by the Administrator.
2. Before starting the Network Control software, please check the following.
(2-1) The computer must have Network Control software installed.
(2-2) The projector should be powered on and the LAN wire is well connected to projector.
(2-3) The LAN module ON/OFF item in SECURITY menu of OSD should be setting ON.
(2-4) Make sure the computer and projector can connect to network. Network Control software
needs to arrange in TCP/IP network communication and the network cable.
NOTE:
IE8 browser & 1024x768 viewing resolution is recommended.
39