Network Control Software Application-Browser Control; Auto Ip Address Setting - Eiki LC-WIP3000 Owner's Manual

Network Control Software Application-Browser Control

There are two ways to connect to the network control: Browser Control and Software control.
Browser Control
Auto IP address setting (DHCP setting is "ON"):
(1) Enable DHCP from the projector on-screen-display menu, under "SECURITY \ LAN SETTING".
Please wait for the PC server to release IP address to the projector.
(3) Enter "Given IP address (For example http://192.168.1.176/)" into the address bar of the web
browser and press "Enter" key or click "Go" button.
40