Setting Up; Arrangement - Eiki LC-WIP3000 Owner's Manual

Hide thumbs Also See for LC-WIP3000:
Table of Contents

Advertisement

Setting Up

Arrangement

1. Before installation, make sure that the projector is turned off and the power cord is disconnected.
2. Do not set up and move the projector, while it is hot.
3. The distance between the projector and screen determines the actual image size. Refer to the table
below to determine the screen size at a given distance.
Note: The dimensions in the table below are approximate.
Projection size
Distance(cm)
When installed against a wall, leave about 20cm (7.9in.) between the projector and the wall.
Please see the detail of the minimum required space on paga 6.
(inch)
50
60
70
80
90
100
Projection distance
(cm)
65.0
79.0
92.0
106.0
120.0
134.0
120.0
106.0
92.0
79.0
65.0
50
60
70
80
14.81 17.77 20.73 23.69 26.65 29.62
12
Offset
(cm)
14.81
17.77
20.73
23.69
26.65
29.62
134.0
Image size(inch)
90 100
Offset (cm)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lc-wsp3000

Table of Contents